Samsung XRN-1610S Скачать руководство пользователя

Страница: 50 / 82

The record data on the specific date will be listed.

The display bar is different according to the data type. So check the data type for the color in the left pane.

If DST (Daylight Saving Time) is configured, overlapping multiple recordings may be produced for a certain moment of time.

Such a time section is distinguished with red color to mark DST section.

•

Go to First : Move to the earliest recording date.

•

Go to Last : Move to the latest recording date.

•

Time : Enter a time to perform the search or use the up/down button <

> to select one.

•

Zoom In : The map enlarges in detail.

It will switch in the sequence of 24hours - 12 hours - 6 hours - 2hours - 1hour.

•

Zoom Out : The map will switch in the reverse order of the detailed mode above.

It will switch in the sequence of 1hour - 2 hours - 6 hours - 12 hours - 24 hours.

•

Preview : Click <

Channel

> and select (click, drag) a time in <

Duration

> to display a still image for the

portion.

- If the selected channel does not contain any recorded data, it will be marked black.

Select a data item and click <

play

The screen switches to the data playback mode.

Color indications depending on current recording status

The recorded data types are represented through the use of different colors. Each color corresponds to a

certain recording type.

event Search

You can search for events by the channel and play them.

Select <

event Search

> in the <

> menu.

Configure the channel, search date and event type settings.

Depending on the menu selected, it will search for all/motion detection/video analysis/defocus detection/audio detection/sensor/

schedule/standard recording events.

•

Date/Time Preview : If you select a data item in the list, the still image of the selected data will be displayed in

the left preview pane.

•

Event : Displays the type of the event that occurred.

Select a data item and click <

play

The screen switches to the event data playback mode.

You can perform the search for recorded data by the time or by the search criteria such as an event.

You can access the <

> menu directly in Live mode.

In live mode, right click with your mouse button.

The Live menu appears.

Select <

The Search menu should appear.

The search can be restricted by the Auto Delete function.

Refer to "

Setting the Recording

Record Option

". (Page 42)

Overlapped data : It only appears if there exists overlapped data on a certain time, produced due to the change of NVR's time

setup. The latest data comes first, from <

List0

It does not appear in <

Backup Search

The search time is based on the time specified by NVR.

time Search

You can search for recorded data of a desired time.

The displayed time is based on the local time zone and the daylight saving time (DST). Therefore, data recorded

at the same time from different areas may differ based on the time zone and the DST.

Select <

time Search

> in the <

> menu.

In the date selection window, click on the <

> button to select a search date.

For using the calendar, refer to "

To use the calendar

". (Page

)

50_

search & play

Содержание XRN-1610S



















































































Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды

Samsung XRN-1610S, Руководство пользователя

Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды