Samsung XRN-1610S Скачать руководство пользователя

Страница: 40 / 82

monitor

You can set the information displayed on the monitor as well as the output system.

monitor settings

You can configure the monitor output-related settings including the displayed information, dwell time and output

system.

•

Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.

If you set <

Continuous

>, it will keep displaying until you cancel it.

•

Display : Displays only checked items on the monitor screen.

•

Sequence switching time : Set the automatic switching time for the segmented screen in live mode.

•

Video Output : Selects either <

Clone

> or <

expand

> mode to output the video, and sets the resolution of

hDmI

> and <

VgA

- Clone mode: You can set the resolution of the main monitor (HDMI) and the sub monitor (VGA) as identical

to each other.

When operating in copy mode, if the resolution is set to a value exceeding 1080p, no image will be displayed on the sub

monitor.

- Expand mode: You can separately set the resolution of the main monitor (HDMI) and the sub monitor

(VGA).

to set an expansion monitor

Select the Expand mode, then <

Setup

> button to change the layout of the expansion monitor is enabled.

Select split mode in the layout mode.

Select as many channels on the channel table as the number of channels selected in layout mode, and you

can view the applicable screens on the monitor.

If the new resolution does not fit the monitor, the output will not be displayed normally. In this case, wait until the monitor

returns to the default resolution and then change to a different resolution.

Specify the event display time and dwell time in consideration of the video delay depending on the network environment.

You can configure the settings of the profile used to display the live image on the expansion monitor in "

Live Streaming

Please refer to "

Live Streaming

". (Page

)

Live display of the expansion monitor supports up to 1280 X 720 resolution.

to adjust the display position

Some monitors many not display information (camera name, icon, time information, etc.) about the NVR,

depending on the condition. Then, you can change the display position of the data.

From the monitor setup menu, select <

Display position Setup

Using the number button to adjust the screen that is cut off.

Press <

text

Device and events can be set up.

Device Settings

Relevant values of a device connected to NVR can be set.

•

Device : Enter the user's desired name

•

Use : Select whether or not to use

•

CH : Select a channel to add a device from a channel table.

•

Port : Display a port number that is set

FULL

SCSI

40_

menu setup

Содержание XRN-1610S



















































































Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды

Samsung XRN-1610S, Руководство пользователя

Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды