Samsung XRN-1610S Скачать руководство пользователя

Страница: 36 / 82

Live Setting

You can change the live transfer settings of the network camera.

•

Live Replacement : You can select the live profile setup mode.

If you select <

manual

>, the profile setup items are enabled, and you can change settings manually.

- Auto : In case of split mode, the profile for live monitoring shows the Live4NVR profile(basic: H.264 800*600

30fps) created at the time of registration and it automatically selects the second profile in case of single

mode.

- Manual : Live monitoring is performed with the profile selected by the user from the registered camera

profiles.

- Record : Live monitoring is performed with the profile set for recording.

•

Profile : You can select the video profile of the connected camera setting.

•

Codec :

Show the codec of the selected profile.

•

Resolution : Show the resolution of the selected profile.

•

Frame Rate : Show the frame rate of the selected profile.

•

Quality : Show the quality of transfer video of the selected profile.

Channel Setting

You can configure the video settings for each channel.

•

Apply to CH : If you select <

Apply to Ch

>, the "

Apply to Ch

" confirmation window will appear.

After selecting channels that the settings will be applied to, click on <

> to apply them to the selected

channels.

•

Video

- <

On/OFF

> : You can turn ON/OFF the selected channel's camera.

- <

Covert1

> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

- <

Covert2

> : Shows nothing but an empty screen while the recording continues.

Setting Camera password

You can change the passwords of all registered cameras at once.

•

New P/W : Input a new password according to the password setting rules.

•

Confirm P/W : Input the new password again.

If you click <

>, a basic guide for password setup is displayed.

If <

View password

> is selected, the password is no longer hidden on the screen when you type it.

A camera password registered with ONVIF and RTSP cannot be changed.

password setting guide

The length and limitations of a password are as follows.

- Uppercase letters/lowercase letters/numbers/special characters, containing at least 3 out of the 4 character

types mentioned: 8 or 9 digit combination

- Uppercase letters/lowercase letters/numbers/special characters, containing at least 2 out of the 4 character

types mentioned: 10 to 15 digit combination

- The password shall not be identical to the user ID.
- To enhance security, it is not recommended to use repeated digits or letters, or keyboard patterns as a

password.

- Special characters accepted for a password : ~`!@#$%^*()_-+=|{}[].?/

36_

menu setup

Содержание XRN-1610S



















































































Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды

Samsung XRN-1610S, Руководство пользователя

Результаты поиска

Содержание XRN-1610S

Отзывы:

Похожие инструкции для XRN-1610S

Бренды по названию

Популярные бренды