WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 43 of 87
CHAPTER 2.
WLAN Management
This chapter describes the possible problems and their solutions concerning WLAN which
is the most essential for WE wireless LAN services.
2.1 WLAN Settings
2.1.1
BSSID of WLAN is not generated
The AP does not provide wireless service to the wireless station attempting to connect.
Symptoms
The WLAN is setup with a Service Set Identifier (SSID), but the wireless station is unable
to find the SSID. The Basic Service Set Identifier (BSSID) information can be checked by
executing the following command.
WEC8500# show bss-if
Possible Causes
The WLAN is not in ‘Enable’ state.
AP Group, Interface Group, Radio band, or SSID is not entered when setting up the
WLAN.
The AP is in ‘down’ status.
Solutions
1) Check that the WLAN is in ‘Enable’ status. Also, check that the correct values are
entered for ‘Radio ID’, ‘If-Group’, and ‘Ap-Group’.
WEC8500# show wlan summary
WLAN_ID Radio_ID SSID Status Wlan_NAME If-Group Ap-Group
======== ======== ============== ======= ========= ======== =========
1 2.4G/5G test1 Enable wlan1 1 1