WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 59 of 87
3.1.2
AP management IP in APC setting error
Symptoms
CAPWAP Status of the AP is not changed to 1/2/0 and cannot be connected to the APC.
WEC8500# show ap summary
AP Mgnt interface IP : 10.10.10.11 (vlan1.110)
AP_ID Profile AP_NAME MAC_Address IPv4Addr State Location
====== ====== =============== ================ ======== ===== ========
2 ap_2 AP_0000aa161616 00:00:aa:16:16:16 0.0.0.0 1/2/0
Possible Causes
The APC AP Mgnt interface IP setting is incorrect.
Checking and Solving the Problem
1) Check if the AP can ping other interfaces of the APC but not the AP Mgnt interface IP.
2) Retrieve the interface state of APC AP Mgnt interface IP and check that it is ‘up’.
[Checking AP Mgnt Interface IP Info from APC]
Check if the AP Mgnt interface IP information is a valid interface and the status of interface
is up.
WEC8500/configure# show apc summary
Check the APC AP Mgnt interface
IP
===== APC Summary =====
AP Mgnt interface IP : 100.100.100.1 (vlan1.100)
MaxApNo
: 500
ActiveApNo
: 10
TotalApNo
: 117
802.11a/n Radios
: 10/107
802.11b/g/n Radios : 10/107
ActiveStationNo
: 1
SecurityAuthType
: X.509
RMacField
: Support
DtlsPolicy
: Clear-text
