WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 48 of 87
The information can be checked using the Web UI in the following way.
On the top menu, click Configuration.
On the left menu, click WLANs.
On the WLAN list, click the WLAN ID.
Click the Security tab.
Click L2 and Check the settings.
2.2.3
Static WEP access failure
Symptoms
When a wireless station attempts to connect to a Wi-Fi network configured for Static WEP,
(re)association is performed normally but subsequent communication fails the connection
is lost after some time. In this case, (re)association information of the wireless station can
be checked in the following way.
The information can be checked executing a CLI command in the following way.
WEC8500# show station summary
The information can be checked using the Web UI in the following way.
1) On the top menu, click Monitor.
2) On the left menu, click Stations.
Figure 5. Web UI-Static WEP access failure
Possible Causes
Wi-Fi network authentication settings of the wireless station are incorrect.
WLAN security settings of the APC are incorrect.
