If you want to register a camera in PnP mode
J
`
When you connect a camera in PnP mode, the initial ID, password and DHCP mode should be set in advance.
`
Samsung cameras are registered for Samsung protocols and other cameras are registered by using the Onvif protocol.
`
In PnP mode, you cannot connect a device that runs the DHCP server in PoE port or camera setting port. (Ex: hub)
To auto-search for and register a network camera
1.
In the <
Cam Registration
> field, click on the <
Auto
> button.
2.
Search for a network camera connected.
`
An already registered camera will be marked in blue in the list.
`
If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as -192.168.1.100),
then press the <
> button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to
assign the IP manually.
3.
Select a camera from the camera list to see a preview of its current video feed.
`
Camera searched with ONVIF does not provide previews.
English
_53
● MENU SETUP
