OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 8 APRIL 2007
8.1.21
download a text file from the web page. Note that popup blockers might prevent
this file from being downloaded without first allowing it.
Once the list is saved the next step is to go to the main node's voicemail and
open the Network Mailbox Template block. On the Call Information screen we
need to edit the Telephone Number settings. These settings tell the system both
its own identity and the identity of the remote voicemail system. Both the Local
and Remote fields are broken down into 3 boxes: country code, area code, and
telephone number.
Local sets the telephone number used to access this voicemail system. For this
example we will say the voicemail group in the main node is 519 and the
voicemail group in the remote node if 529. The Local field will contain 519 in the
telephone number box while the country and area code boxes are left blank.
Remote will set the telephone number used to access the remote voicemail
system. We will enter 529 in the telephone number field and leave the country
code and area code boxes blank.
Once the Template is set up we are ready to create all of the network
subscribers. To do this open the Operating Utilities menu in the main node and
go to the Subscriber Import screen.
Import Text File is the location of the text file downloaded previously.
You can create determines what type of blocks will be created. Because we are
setting up networking this should be set to Network Mailbox blocks.
After clicking Submit a window will appear showing the boxes that will be
created and asking for verification. When OK is clicked the new Network
Mailboxes will be created and a success message will be displayed showing the
number of blocks created.
Subscribers can then forward or create messages for the remote subscribers.
Note that for this to work over SPNet the DTMF Type in MMC 835 of both nodes
must be set to use Inband (RFC2833).
Programming:
In MMC 835 of the remote node set DTMF Type to Inband (RFC2833).
Open the Subscriber menu in the remote node's voicemail.
Check the box in the upper left corner and click Export Subscriber.
Accept the download and save the file to the desktop as Subscriber.TXT.
In MMC 835 of the main node set DTMF Type to Inband (RFC2833).
In the main node's voicemail open the Network Mailbox Template block.
Go to the Call Information screen.
Home Page
Table of Contents