OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 852
ALM
NO.
ALM
CODE
ALARM
DEFINITION
50 MJD19 PRI
Restart
The PRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
51 MJD20 BRI
Restart
The BRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
52 MJD21 PCM
Loss
Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
53 MJD22 PCM
Recovery
Recovery of PCM coding on a digital
facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
54
MJE01
MGI Restart
An MGI card has restarted.
55
MJE02
MGI Stop
An MGI card has stopped.
56
MJE03
MGI IP Duplicate
MGI IP address conflict.
57
MJE04
MGI Ntwk Error
58
MJE05
MGI Ntwk Rec.
MGI Recovery.
59
MJE06
MGI DSP Error
60
MJE07
MGI DSP Run
MJE10
SVM Card Restart
Card Restarted
MJE11
SVM Card Halt
Card Halted
MJE12
SVM Card Down
Card When Down
MNF32
SVM Card Ready
Alarm Code when voicemail is ready.
MNF33
SVM Card Request
Alarm Code when voicemail request the
number to MCP after restarting.
61 MNF01 Card
Out
A circuit card mounted in a universal slot
has been removed from service or is not
recognized by the Common Control
Processor
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
62 MNF02 Card
In
A circuit card mounted in a universal slot
has been returned to service.
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
63 MNF03 IPC
Error
Inter processor communication error
has occurred.
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
Home Page
Table of Contents