Samsung OFFICESERV 7100 Скачать руководство пользователя страница 439

Страница: 439 / 709

OfficeServ 7100

PROGRAMMING

TECHNICAL MANUAL

PART 2 MAY 2009

MMC: 837

•

TRK REG EXP:

The time interval for OfficeServ registration request. The final

expiration time period is determined by Expires value
specified in the response message sent by the ITSP.

•

ALIVE NOTI:

This option is the check the aliveness of the ITSP. If this

field is set to OPTIONS, the SIP OPTION messages will be
sent periodically based on the time value in NOTIFY TIME.

•

NOTIFY TIME:

The time interval for sending the SIP OPTIONS message.

•

EXCLUSIVE:

When set to YES, all incoming SIP messages from

unidentified sources will be rejected. Only SIP messages
from the designated outbound proxy server will be

accepted.

•

IMS OPTION:

When this option is enabled, the SIP message format will be

changed to interact with the IMS switch.

•

ASSERTED ID:

If the ITSP requires use of the P-Asserted-ID field, OfficeServ

can be set according to the ITSPs requirement.

PRIMARY:

P-Asserted-ID contains primary number and FROM header
contains secondary number.

ALTERNATE:

P-Asserted-ID header contains secondary number and
FROM header contains primary number.

•

PRIVACY:

When this option is enabled, the caller line ID will not be

sent.

•

SIP PEERING:

This option allows the SIP to be used as the networking
protocol among different PBX.

•

CLIP TABLE:

This option select which of the four CLIP tables to use in the

MMC 321 (SEND CLI NUMBER).

•

SS TYPE:

This option sets the type of SIP service for supplementary

service.

SERVER MANAGED:

Use REFER method.

PBX MANAGED 1:

Use RE-INVITE method.

Home Page

Table of Contents

Содержание OFFICESERV 7100






































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OFFICESERV 7100

Отзывы:

Похожие инструкции для OFFICESERV 7100

Бренды по названию

Популярные бренды

Samsung OFFICESERV 7100, Техническое руководство

Результаты поиска

Содержание OFFICESERV 7100

Отзывы:

Похожие инструкции для OFFICESERV 7100

Бренды по названию

Популярные бренды