Samsung MOSCON-E7 Скачать руководство пользователя страница 4

Страница: 4 / 88

Maintenance and inspection

• Do not remove the digital operator from the unit since it carries

high voltages. Using the cable between operator and unit is also
prohibited, since it is very dangerous.

• Do not touch the terminals since some of them carry high

voltages and are extremely dangerous.
Otherwise, it may cause an electric shock.

• Do not remove the cover when power is being supplied to the

inverter. Always turn off the power to the inverter through the
MCCB when detaching the cover.
Otherwise, the charge remained in the capacitor may cause an
electric shock.

• After turning off the main circuit power supply, wait for a while

before maintenance or inspection since it may remain charged.
Otherwise, it may cause an electric shock.

• Maintenance, inspection, and replacement of parts must be done

only by authorized personnel.
Otherwise, it may result an injury or an accident.

• Remove all metal objects, such as watches and rings, before the

maintenance, inspection, and replacement of parts. Also, always
use grounded tools.
Otherwise, it may cause an electric shock.

• Always turn off the power supply before the inspection

Otherwise, it may cause an electric shock.

DANGER

Safety precautions

• Do not touch the COMOS IC in the control board directly.

Otherwise it can be damaged by static electricity.

• Do not change the wiring, or remove the digital operator or

connectors, during operation.

Otherwise, it may cause a personal injury.

CAUTION

MOSCON E-7 User’s Manual

Содержание MOSCON-E7

























































































Результаты поиска

Содержание MOSCON-E7

Отзывы:

Похожие инструкции для MOSCON-E7

Бренды по названию

Популярные бренды

Samsung MOSCON-E7, Руководство пользователя

Результаты поиска

Содержание MOSCON-E7

Отзывы:

Похожие инструкции для MOSCON-E7

Бренды по названию

Популярные бренды