manualshive.com logo in svg

Samsung iPOLIS SRN-470D, Руководство пользователя

Поделиться
Скачать
Samsung iPOLIS SRN-470D Скачать руководство пользователя страница 64

64_

 

menu setup

menu setup

SETTING THE RECORDING

You can setup scheduled recording, event recording and other recording related settings.

Recording Schedule

Make your reservation on a date and time to schedule the recording on specified time.

[

MENU

] 

 ▼ 

 <

Record

> 

 ► 

 <

Recording Schedule

> 

 [

ENTER

] 

 ▲▼◄► 

 [

ENTER

]

• All : The entire time range (Monday through Sunday including holidays, AM 0~ PM 23) will be reserved with 

the same recording schedule

• Apply to All CH : If selected <

Apply to All CH

>, "

Apply to All CH

" window appears.

Press <

OK

> to apply the setup to all channels.

 

M

 

`

Event recording and scheduled recording starts about 3 seconds prior to the event/schedule for guaranteed recording.

Record setting by the color

Color

Function

Description

No Color

No Recording

No schedule / event recording

Green

Continuous

Scheduled recording only

Orange

Event

Event recording only

White

Both(Cont&Evnt)

Both scheduled / event recordings

Each press of a selected cell will cycle through <

No Recording

>-<

Continuous

>-<

Event

>-<

Both(Cont&Evnt)

>.  

Содержание iPOLIS SRN-470D








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды