Samsung iPOLIS SRN-470D Скачать руководство пользователя

Страница: 59 / 135

English

_59

● MENU SETUP

If the channel is set to <

Covert1

> or <

Covert2

> mode, the channel’s sound is not hearable.

However, the channel’s sound is recorded if its Audio setting is set to <

>, even the sound is not heard in Live mode.

• Audio

- If set to <

>, you can turn the audio of the channel ON/OFF on the Live screen.

- If set to <

OFF

>, the channel's audio is off on the Live screen and not recorded.

• Camera Name : Provide a camera Name.

You can enter up to 15 characters including space.

• Dwell Time : You can specify the dwell time for each channel.

• Scan Type : Select either Interlace or Progressive as necessary.

Video quality may degrade if set to Interlaced for a progressive network camera.

Set to Progressive for progressive network cameras, and set to Interlaced for interlaced network cameras.

Storage Device

You can check information on storage devices.

Confirming Devices

You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).

[

]



▲▼



Device



►



Storage Device



Device

• No. : Shows the assigned number of the internal HDD.

To see the detailed positioning of the HDD according to the number, refer to <

HDD Map

• Used/Total : Shows the used/total capacity of the storage device.

• Usage : Sets the storage device's usage.

- Use both USB memory and HDD for backup purpose only.

The eSATA HDD can be used for either extended storage or backup purpose.

If an eSATA HDD device is used for extended storage or backup purposes, disconnecting eSATA device may restart the
system.
For backup use, the device can be disconnected if it’s not in use.

• Status/Management : Display the status of the storage device.

• HDD Map : Shows the internal HDD's locations according to assigned numbers.

Refer to this for servicing or additional HDD installation.

Содержание iPOLIS SRN-470D








































































































































Результаты поиска

Содержание iPOLIS SRN-470D

Отзывы:

Похожие инструкции для iPOLIS SRN-470D

Бренды по названию

Популярные бренды

Samsung iPOLIS SRN-470D, Руководство пользователя

Результаты поиска

Содержание iPOLIS SRN-470D

Отзывы:

Похожие инструкции для iPOLIS SRN-470D

Бренды по названию

Популярные бренды