62_
menu setup
menu setup
Monitor
You can set the information displayed on the monitor as well as the output system.
Monitor settings
You can configure the monitor output-related settings including the displayed information, dwell time and output
system.
[
MENU
]
▼
<
Device
>
►▼
<
Monitor
>
[
ENTER
]
▲▼◄►
[
ENTER
]
• Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.
If selected <
Continuous
>, it displays the channel until you press [
ALARM
] button to release it.
• Display : Displays only checked items on the monitor screen.
• Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of the
Live screen.
• Video Output : Select a video output type from <
VGA
> and <
HDMI
>.
If your selection of <
VGA
> or <
HDMI
> does not match with the monitor setting, the video may not be output.
Move to [
STOP
(
@
)]
[
ZOOM
]
[
STOP
(
@
)]
[
ZOOM
] and press [
MENU
] to display the default resolution
dialog where you can change the resolution as you want.
`
If the changed resolution is not supported by the monitor, the video may not be displayed properly. If this is the case, the screen
will restore the default resolution after a certain time. Then, you can change it to a different resolution.
M
`
Specify the event display time and dwell time in consideration of the video delay depending on the network environment.
