Connections
Connecting to a TV
Connections
Connecting to an antenna
ENG
Supported HDMI CEC function on Remote control
is a convenient function that offers linked operations with other Samsung products that have the
feature. To operate this function, connect this product to an Samsung TV using an HDMI cable.
The STB supports HDMI functionality (extensions of the HDMI CEC standard). This makes it possible to
control the STB using a TV remote control (or to control the TV using the STB remote control in the case of the
automatic power on function).
Supported functions are:
•
Automatic power off (when the Standby button is pressed on the TV, the TV goes to standby mode together
with the STB)
•
Automatic power on (when the Standby button is pressed on the STB, the STB wakes up from standby mode
together with the TV)
•
Remote control command sending; the following remote control buttons are supported: channel change,
menu, guide, channel list and arrows.
CoNNECtiNG to aN aNtENNa
You can connect your double tuner STB to an antenna in two supported configurations.
Double tuner configuration
In this configuration, both tuners have to be connected to antenna signal independently by two separate
coaxial cables. This configuration allows both tuners tuning to two satellite transponders at the same time. With
double tuner configuration, the user can take advantage of all possible feature set of PIP, Double-REC with no
restrictions.
(
Notice
) Be aware that double tuner configuration does not support connecting two satellite dishes separately
to the STB! To receive multiple satellites signal, a DiSEqC switch should be used in between dishes and tuner
where tuners are connected to switch independently.
Tuner loop configuration
In this configuration, antenna signal is passed by only one coaxial cable and the connection between tuners
is created internally. This configuration introduces minor limitations when both tuners are used at the same
time. In this case, functionalities like PIP or Double-REC are restricted to services with the same transponder
polarization (Vertical/Horizontal).
In case of the loop configuration, satellite signal should be connected to the first tuner (ANT 1 IN) (i.e. next to
Common Interface Slot).
19
