Settings
Channel
Settings
Channel
ENG
Tuner Settings
◈
Loop configuration
In this configuration, antenna signal is passed by only one coaxial cable and the connection between tuners is
created internally. And satellite signal has to be connected to the first tuner (ANT 1 IN) (near PCMCIA slot).
This configuration introduces minor limitations when both tuners are used at the same time.
The limitation is connected with polarization and lo/hi band. E.g. when the first tuner (ANT 1 IN) is tuned
to TS with Horizontal polarization, LNB sets 18V, and the second tuner (ANT 2 IN) is connected to TS with
Vertical polarization LNB sets 13V. But it is not possible to have 18V and 13V on single cable, so 18V is set. It
means that the second tuner (ANT 2 IN) cannot be tuned to TS and no signal is observed.
In this case, functionalities like PIP or Double-REC are restricted to services with the same transponder
polarization (Vertical/Horizontal, Tone On/Off).
◈
Double tuner configuration
In this configuration, both tuners have to be connected to antenna signal independently by two separate
coaxial cables. This configuration allows both tuners tuning to two satellite transponders at the same time.
With double tuner configuration, the user can take advantage of PIP or Double-REC with no restrictions.
Please refer to the following table for the detail functionalities.
Installation
Type
Tuner settings
Availalble/Restricted Services
Expected
Result
1.LNB
1.1 Double
[Tuner1 (ANT 1 IN),
Tuner2 (ANT 2 IN)]
-
2 REC : same TS
-
2 REC : different TS
-
PIP : same TS
-
PIP : different TS
-
Zapping among different TS with 1 REC
O
O
O
O
O
1.2 Loop
[Tuner1 (ANT 1 IN)]
1.2.1 Merged satellite signal -- Tuner1
1) Under same Position(Horizontal/Vertical) and same Tone(On/Off)
-
2 REC : same TS
-
2 REC : different TS
-
PIP : same TS
-
PIP : different TS
-
Zapping among different TS with 1 REC
O
O
O
O
O
2) Under different Position(Horizontal/Vertical) and different
Tone(On/Off)
-
2 REC : same TS
-
2 REC : different TS
-
PIP : same TS
-
PIP : different TS
-
Zapping among different TS with 1 REC
-
X
-
X
X
1.2.2 Single(Not merged) satellite signal -- Tuner1 (only signal from
MPEG player)
-
2 REC in same TS
-
2 REC among different TS
-
PIP among same TS
-
PIP among different TS
-
Zapping among different TS with 1 REC
O
X
O
X
X
1.3 Loop
[Tuner2 (ANT 2 IN)]
Not Supported (No AV)
: It will be mentioned in 1st install help description and User manual
to avoid user confusion.
33
