Section
9
120 Bluetooth
Section
9
Bluetooth 121
8.
Press the
button on your Jitterbug to begin searching for the
Bluetooth
headset.
Please wait while your Jitterbug searches for the
Bluetooth
headset. During this
time,
“Searching”
will appear on the Inside Display.
9.
If you are using the Samsung WEP 470, use the
“Up/Down”
button and scroll through
the options until
“Samsung WEP 470”
is highlighted in gray in the middle of the Inside
Display of your Jitterbug.
10.
Press the
button on your Jitterbug to select the
“Samsung WEP 470.”
11.
You will then be asked to enter the PIN number for the Samsung WEP 470. Enter the
following numbers and press the
button.
PIN number = 0000
12.
You will see the message
“Pairing Device Samsung WEP 470”
on the Inside Display
of your Jitterbug.
13.
When your Jitterbug is successfully paired with your Samsung WEP 470 Premium
Bluetooth
headset, you will see the message
“Samsung WEP 470 is now Paired”
on the Inside Display of your Jitterbug followed by the message
“Samsung WEP 470
Connected”
and a chime sound notifying you that your Jitterbug is now connected
with your Samsung WEP 470 Premium
Bluetooth
headset.
14.
Your Jitterbug is now
“Paired”
with your
Samsung WEP 470 Premium
Bluetooth
headset and ready to make and receive calls.
1008301_GreatCall_jB_HowToGuide_R6.indd 130-131
10/13/10 12:12 PM