Section
2
42 Placing And Receiving Calls
Section
2
Placing And Receiving Calls 43
Receiving A Call When Your Jitterbug Is Open:
1.
When the
“ANSWER?”
question appears on the Inside Display press the
button
to connect.
2.
A
“Connected”
message will appear on the Inside Display and the caller’s voice will
be heard through the earpiece speaker.
Ending A Call
To end a call, press the
button or close your Jitterbug.
Ignoring A Call
To Ignore A Call When Your Jitterbug Is Closed:
When the phone is ringing you can press the
volume button to mute the ringer.
If
Voice Mail
is active, the caller will be directed to your
Voice Mail
. If
Voice Mail
is not
active, callers will get a message that you are not available.
To Ignore A Call When Your Jitterbug Is Open:
You can send a caller directly to your
Voice Mail
by pressing the
button when
you see
“ANSWER?”
at the bottom of the Inside Display. This will give an unavailable
message if you do not have
Voice Mail
.
To ignore an incoming call while you are already on a call, press the
button.
Your Jitterbug will continue to ring until:
• You answer the call
• The calling party hangs up
• You mute the ringer
• The call is sent to
Voice Mail
1008301_GreatCall_jB_HowToGuide_R6.indd 52-53
10/13/10 12:12 PM