Section
9
114 Bluetooth
Section
9
Bluetooth 115
Using Your Jitterbug With The Samsung WEP 470 Premium
Bluetooth Headset
There are three steps to set up your Jitterbug with the Samsung WEP 470 Premium
Bluetooth
headset:
1.
Turning the
Bluetooth
feature on your Jitterbug On and Off.
2.
Setting your Samsung WEP 470 Premium
Bluetooth
headset to
Pairing Mode.
3.
Setting your Jitterbug to
Pairing Mode.
Turning The Bluetooth Feature On Your Jitterbug On And Off
Turning The Bluetooth Feature On:
The following procedure is applicable to all
Bluetooth
compatible devices. You must have
your Jitterbug set to “
Bluetooth ON”
to use any
Bluetooth
device.
1.
Starting from the
Main Screen
of your Jitterbug, scroll through the options using the
“Up/Down”
button until
“Settings”
is highlighted in gray in the middle of the Inside Display.
2.
Press the
button on your Jitterbug to select the
“Settings.”
3.
Scroll through the
“Settings”
options using the
“Up/Down”
button until
“Bluetooth”
is
highlighted in gray in the middle of the Inside Display.
4.
Press the
button to select the
“Bluetooth”
option.
5.
Scroll through the
“Bluetooth”
options using the
“Up/Down”
button until
“Bluetooth OFF”
is highlighted in gray in the middle of the Inside Display.
6.
Press the
button to turn
“Bluetooth ON.”
You will now see the words
“Bluetooth ON”
highlighted in gray in the middle of the Inside Display.
7.
When your Jitterbug is set with
“Bluetooth ON,”
you will see the
Bluetooth
symbol in
the top right corner of the
Main Screen.
1008301_GreatCall_jB_HowToGuide_R6.indd 124-125
10/13/10 12:12 PM