Samsung ELSR362-00004, Руководство по установке

Страница: 44 / 103

5. Electrical Connections
5.7.1 AC Circuit Breaker and DC Disconnect Switch
The circuit breaker populated on the distribution board varies depending on the installer.
Follow the installation standards to install a circuit breaker satisfying the voltage, the current
specification of the Grid and the PV. The cables presented in the [Table 5-5] are
recommended for use.
Standard Short circuit current rating
AC circuit breaker 230Vac / 32A 10kA minimum
DC disconnect switch 650Vdc / 15A or more -
Area Insulation Color code
Grid (L,N) 6mm
2
600V or more Black
PE 6mm
2
600V or more Green with yellow lines
PV (+), (-) 6mm
2
700V or more Black
[Table 5-5: Circuit breaker, DC Disconnection Switch and power line specification]
As illustrated in the [Figure 5-17], the distribution box connection diagram, the connection
between the All in One system and the distribution box is made to the terminals of the solar
energy (,PVdso1-,, and PVdso2-) of PV1+, PV1-, PV2+, and PV2-.
On one hand, the main body terminals (PV1 +, PV1 -, PV2+, PV2-) and the distribution box
terminals are connected in proper order. On the other hand, for the lines coming from the
AC GRID, L and N leads are connected to the distribution board (LG, NG). The lines coming
out from the LGO, PGO of the distribution board are be connected to the L and N terminals
of the All in One System.
5.7.2 RCD (residual current device) Leakage Circuit Breaker
This product can cause a DC current in the external protective earthling conductor. Where a
residual current-operated protective (RCD) or monitoring (RCM) device is used for protection
in case of direct or indirect contact, either an RCD or RCM of Type A or Type AC is only
available on the supply side of this product.
ITEM Description
Type AC AC current sensitive
Type A AC current sensitive and pulse current sensitive
[Table 5-6: RCD Leakage circuit breaker description]
36 Australia (Eng.) 05/2015. Rev1.1