Samsung ELSR362-00004 Скачать руководство пользователя страница 77

Страница: 77 / 103

9. Problem Confirmation

Problem Confirmation

Checking event codes is available on the website (

https://myess.samsungsdi.com

If the Internet is not available, the event codes cannot be checked.

9.1

General Events

The general events contain warnings and protection.

The warning level events does not stop the generating process. A displayed warning
message automatically disappears as soon as the issue is resolved.

When protection level events occur, the product stop the generating process. The process

may automatically resume as long as the issue is resolved.

9.1.1

INVERTER General Events (Warnings)

Type

Code

Description

Measures

WARNING

E001

GRID UNDER

VOLTAGE

When the system voltage drops below

standard level.
This is the overall voltage-current warning

message, with no special change in the

sequence.
The warning message disappears on

reversion to the normal state.

E002

GRID OVER

VOLTAGE

When the system voltage rises above

standard level.
This is the overall voltage-current warning

message, with no special change in the

sequence. The warning message disappears

on reversion to the normal state.

E003

BATT UNDER

VOLTAGE

When the battery energy voltage drops

below standard level.
This is the overall voltage-current warning

message, with no special change in the

sequence. The warning message disappears

on reversion to the normal state.

E004

BATT OVER

VOLTAGE

When the battery energy voltage drops

above standard level.
This is the overall voltage-current warning

message, with no special change in the

sequence. The warning message disappears

on reversion to the normal state.

E005

FAN WARNING

When the Fan operation is abnormal.
This is the overall Fan warning message,

with no special change in the sequence.
The warning message disappears on

Australia (Eng.) 05/2015. Rev1.1

Содержание ELSR362-00004








































































































Результаты поиска

Содержание ELSR362-00004

Отзывы:

Бренды по названию

Популярные бренды

Samsung ELSR362-00004, Руководство по установке

Результаты поиска

Содержание ELSR362-00004

Отзывы:

Бренды по названию

Популярные бренды