Samson TROVIS SAFE 3731-3, Монтаж и эксплуатация

Страница: 74 / 104

Code
no.
Parameter – Display, values
[default setting]
Description
Note: Codes with marked with an asterisk (*) must be enabled with Code 3 prior to configuration.
24* Limit of total valve travel
1000 to 99 · 10
7
[1 000 000]
Exponential reading from 9999 travel
cycles onwards
ESC
Limit value of total valve travel. If the limit is exceeded, the fault
alarm and the wrench icons appear on the display.
25* Binary output
[A1 - / -]
ESC
This code allows you to find out on site whether the positioner
has an optional binary output or not. When a binary output
exists, its switching performance can be read and set.
If there is no binary output, - - - - appears on the display of the
positioner.
The binary contacts A1, A2 and the fault alarm output can be
configured at the output as follows:
Alternating display Meaning
A1 -/ - A1 functioning as NO contact
A1 ---- A1 functioning as NC contact
A2 -/ - A2 functioning as NO contact
A2 ---- A2 functioning as NC contact
FAUL FAUL Fault alarm output (always NC contact)
26* Limit value A1
No
0.0 to 100.0 [2.0] % of the
operating range
ESC
Displaying or changing the software limit value A1 in relation to
the operating range.
27* Limit value A2
No
0.0 to 100.0 [98.0] % of the
operating range
ESC
Displaying or changing the software limit value A2 in relation to
the operating range.
74
EB 8387-3S EN
Code list