Samson TROVIS SAFE 3731-3, Монтаж и эксплуатация

Страница: 6 / 104

1 Important safety instructions
For your own safety, follow these instructions concerning the mounting, start up and opera-
tion of the positioner:
4
The positioner is to be mounted, started up or operated only by trained and
experienced personnel familiar with the product.
According to these Mounting and Operating Instructions, trained personnel refers to
individuals who are able to judge the work they are assigned to and recognize
possible dangers due to their specialized training, their knowledge and experience as
well as their knowledge of the relevant standards.
4
Explosion-protected versions of this positioner may only be operated by personnel
who have undergone special training or instructions or who are authorized to work
on explosion-protected devices in hazardous areas. Refer to section 10.
4 Any hazards that could be caused by the process medium, the operating pressure, the
signal pressure or by moving parts of the control valve are to be prevented by means
of the appropriate measures.
4
If inadmissible motions or forces are produced in the actuator as a result of the supply
pressure, the supply pressure must be restricted by means of a suitable supply
pressure reducing station.
To avoid damage to any equipment, the following also applies:
4 Do not operate the positioner with the back of the positioner/vent opening facing
upwards.
The vent opening must not be sealed or restricted when the positioner is installed on
site.
4 Proper shipping and appropriate storage are assumed.
4
Do not ground electric welding equipment near to the positioner.
Note: The device with a CE marking fulfills the requirements of the Directives 2014/30/EU
and 2004/108/EC. The Declaration of Conformity is available on request.
6
EB 8387-3S EN
Important safety instructions
Vent opening