Samson TROVIS SAFE 3731-3, Монтаж и эксплуатация

Страница: 49 / 104

7.3 Checking the operating
range of the positioner
To check the mechanical attachment, the
valve should be moved through the operat-
ing range of the positioner in the
manual
mode using the manual reference variable
w.
Select manual operating mode (MAN) :
Mode
Default: MAN
Turn
→
Code 0
Press , Code
0
blinks.
Turn
→
MAN
Press to change the positioner to manual
mode.
Checking the operating range:
Manual reference variable
(the current opening angle
appears)
Turn
→
Code 1
Press , Code 1 and icon blink.
Turn until the pressure builds up in the
positioner, and the control valve moves to its
end positions to check the travel range/an-
gle of rotation.
The angle of the lever on the back of the
positioner is indicated on the display.
A horizontal lever (mid-position) is equal to
0°.
To ensure the positioner is working prop-
erly,
the outer bar elements may not blink
while the valve is moving through the oper-
ating range.
The manual mode can be exited by pressing
the rotary pushbutton (
).
The permissible range has been exceeded
when the displayed angle is greater than
30°, and the outer right or left bar element
blinks.
The positioner changes to the fail-safe posi-
tion (SAFE).
After canceling the fail-safe position (SAFE)
(see section 8.2.2) it is
absolutely necessary
to check the lever and pin position as de-
scribed in section 4.
WARNING!
To avoid personal injury or property dam-
age caused by the supply air or electrical
auxiliary power, disconnect the supply air
and electrical auxiliary power before ex-
changing the lever or changing the pin posi-
tion.
EB 8387-3S EN
49
Start-up – Settings