Samson TROVIS 5432, Монтаж и эксплуатация

Страница: 8 / 38

3. Start-up
The controller is ready for use with its factory (default) settings after it has been installed and
the power supply has been connected.
To start up, switch on the power supply.
Setting the current time and date
When the controller is started up for the first time or the
controller is disconnected from the power supply for more
than 72 hours, the default setting with blinking time ap-
pears in the display.
Now set the time and date.
Turn the control knob until you reach the correct time and
press the knob to acknowledge the time.
The year 2001 appears in the display as the default setting.
Turn the control knob if you want to change the year and
press the knob to acknowledge the year.
The date (day and month) appear in the display as the de-
fault setting.
Turn the control knob to set the date and press the knob to
acknowledge the date.
You have now completed entering the time and date. The
controller switches automatically to the display level.
The reference value for room temperature or set point and
actual value for the flow temperature appear in the display.
For further information about setting other parameters,
please refer to the following chapters.
8
EB 5432-1 EN
Start-up