Samson TROVIS 5432, Монтаж и эксплуатация

Страница: 16 / 38

After entering the last time-of-use period, the time period
symbol still blinks in the display,
turn the control knob to access the next day and set like-
wise the required time-of-use periods.
Repeat the setting procedure for all of the following days.
After entering the last time-of-use period, the time period
symbol still blinks in the display,
turn the control knob clockwise or counterclockwise until
End appears in the display.
Press the control knob to acknowledge the settings.
The start and stop times for the currently valid time-of-use
period appear in the display.
Turn the control knob until
End appears in the display.
Press the control knob,
the controller switches over to the display level.
5.2.1 Reading the set times-of-use
If you want to check the set times-of-use, you can view each
individual day.
If you are not on the user level, press the control knob for
three seconds.
First of all, the time appears in the display.
Turn the control knob clockwise one position. The currently
activated time-of-use appears in the display.
Press the control knob. The time period symbol starts to blink.
Now you can read all the time-of-use periods for each day
of the week by turning the control knob.
If you want to exit this menu:
Turn the control knob until
End appears in the display.
Press the control knob, the currently active time-of-use ap-
pears in the display.
Turn the control knob until
End reappears in the display.
Press the control knob,
the controller switches over to the display level.
16
EB 5432-1 EN
Setting options on the user level