SamplexPower PSR-1200-24, Руководство пользователя, Страница: 82 / 100

82 | SAMLEX AMERICA INC.
13.2.2 Creating Nickname for the unit
Page shown in Fig 13.5 would first pop up
an authorization dialog before accessing the
content, which is Password-Based.
The values in the “Description” / “Location”
(Fig 13.1) fields will be shown on the Dash
Board as “Description” / “Location”, and also
be sent by SNMP response.
13.2.3 Change Password and User Name
Change Password and User Name page (Fig 13.6)
would first pop up an authorization dialog before
accessing the content, which is Password-Based.
The user needs to use the new “User Name” and
“Password” to access “SNMP Config”, “Control”
and “Admin” pages after changing the admin
account setting.
13.2.4 Reset Password
Password is reset using programming facility
available through the LCD Display on the unit.
1. Refer to Menu Map for Programmable
Operating Parameters at Fig 10.1 in Section
10. From any of the LCD Operating Parameter
Screens in the Dashboard, press the Down
key
to go to the Main Menu screen for
Parameter Group 1 – "UI Settings". Press
Right key
5 times to go to Main Menu
Screen for Parameter Group 6 – "Ethernet".
Press the Down key
to go to the Sub Menu
for Parameter Group 6, Parameter (a) – "IP
Address". Press the Right key
2 times to go
to Parameter (c) – "RST Password". Press Down
key
to go to the Setup Screen for "RST
Password". Press the Right key to complete
reset action.
2. The default User Name is "admin" and the
default Password is "0000".
SECTION 13 | Web Monitoring and SNMP
Fig 13.6 Page for changing User Name and Password
Fig 13.5 Creating nickname for the unit