SamplexPower PSR-1200-24, Руководство пользователя, Страница: 63 / 100

SAMLEX AMERICA INC. | 63
SECTION 10 | Programming of Operating Parameters
TABLE 10.2 STRUCTURE OF PROGRAMMING SCREENS
Types of Screens
(Column 1)
Examples of Screens
(Column 2)
Remarks
(Column 3)
Main Menu and
Sub Menu Screens
1 . U I S e t t i n g s
| V
– –
>
Screen 1
a . L CD C o n t r a s t
| V
– –
>
Screen 2
<
L CD C o n t r a s t
>
–
5 0
%
+
Screen 3
6 . E t h e r n e t
<
– –
V |
Screen 4
• 1 st line, left end:
§
Numeral 1 to 6 show the Group No. in the MAIN MENU (e.g. Screen 1
shows Group 1 “UI Setting” in the MAIN MENU)
§
Alphabets “a” to “f” show the Parameter Item Number in the SUB MENU
(e.g. Screen 2 shows SUB MENU Parameter “a. LCD Contrast”)
• 1
st
line, center
§ Name of the Group / Parameter
• 2 nd line, left end
§ Left arrow “<- -” (e.g. Screens 3 & 4): Shows that there are additional
screens in the Menu on the left of this screen that can be accessed by
successive pressing of the Left Button .
§ Vertical bar “|” (e.g. Screens 1 & 2): Shows that there are no
additional screens in the Menu on the left of this screen.
– NOTE: This screen will be the 1st screen in MAIN / SUB MENU
• 2
nd
Line, right end
§ Right Arrow “- ->”(Screens 1 & 2): Shows that there are additional
screens in the Menu on the right of this screen that can be accessed by
successive pressing of the Right Button .
§
Vertical bar “|” (e.g. Screen 4): Shows that there are no additional
screens in the Menu on the right of this screen.
– NOTE: This screen will be the last screen in MAIN / SUB MENU
•
2
nd
Line, middle arrow “ V ”: The middle arrow mark “ V ” shows that
pressing the Down Key will (i) enter SUB MENU (Screen 2) from MAIN
MENU (Screen 1) or (ii) Setup Screen (Screen 3) from SUB MENU (Screen 2).
Sub Menu Item
Screens
<
L CD C o n t r a s t
>
–
5 0
%
+
Screen 5
Example 1: Changing parameter value (Screen 5 on the left)
The 1
st
line of the screen shows the following:
• 1
st
line, center
§
Name of the Parameter
• 2
nd
line, center
§ Value of the parameter when the parameter setup screen was entered
from the SUB MENU
• Left ends “< ” and “ – ”
§
Left arrow “< ” & minus sign “ – ” mean that pressing the Left Button
will decrease the value of the parameter
• Right ends “> ” and “+”
§
Right arrow “>” & plus sign “+” means that pressing the Right Button
will increase the value of the parameter
Screen 6
<
I n v e r t e r Mo d e
>
[ O f f - L i n e ]
Example 2: Changing parameter option (Screen 6 on the left)
The 1
st
line of the screen shows the following:
• 1 st line, center
§
Name of the Parameter
• 2nd line, center
§
Option of the parameter when the parameter setup screen was entered
from the SUB MENU
• 1st line right end “> ”
§
Right arrow “> ” means that pressing the Right Button will switch
to the other option
• 1st line, left end “< ”
§ Left arrow “< ” means that pressing the Left Button will switch to
the previous option
Save / Discard
Screen
<<<
S a v e
D i s c a
r
d
When this screen is displayed for the first time, the Blinking Cursor “<<<” will
appear against “Save”.
Press the Down Key to move the Blinking Cursor “<<<” next to “Discard”
When the Up Key is pressed, Save / Discard action will initiated based on
the position of the Blinking Cursor.
After Save / Discard action is completed, the screen will move back to the
same DASH BOARD screen from where it had exited for programming.