44 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 45
SECTION 4 |
Parameter Setup
4.4.2.7 RESET VOLTAGE
(Table 4.3, Screen No. 7)
•
The inverter will restart when the battery voltage rises to this set value or above after "Bat-
tery low voltage!" shutdown occurs.
•
If automatic starting / stopping of Generator is used with RELAY FUNCTION set at "3=
Generator 1" [Section 4.8.2.5.2(b)], the Relay will turn off when the battery voltage remains
at this value or higher for time period equal to "GEN OFF DELAY" (Section 4.4.2.18). Turning
Off the Relay will automatically stop the Generator [Refer to Section 4.8.2.5.2(b) for details].
S e l e c t
G r o u p
*
C H A R G E
C U R V E
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
B U L K C U R R E N T
2 0 A
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
R E S E T
V O L T A G E
1 4 . 0 0 V
P a s s w o r d
k e y
i n
0 0 0 0
Enter Key
Down Key x 6 times
Enter Key
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
R E S E T
V O L T A G E
1 4 . 0 0 V
Password 8052
See Section 4.3.1
4.4.2.8 LOW VOLT ALARM
(Table 4.3, Screen No. 8)
•
When inverting, if battery voltage is under the set value of "LOW VOLTAGE ALARM", the
Red LED marked "Fault" flashes once per second. The buzzer in EVO
TM
Inverter/Charger
will beep once per second.
•
If automatic starting / stopping of Generator is used with "RELAY FUNCTION" pro-
grammed at "2=Generator 0" [Section 4.8.2.5.2(a)] or "3= Generator 1" [Section
4.8.2.5.2(b)] or "4= Generator 2" [Section 4.8.2.5.2(c)], the Relay will turn ON if the
battery voltage drips to the value of "LOW VOLTAGE ALARM" and remains at this level or
lower for time period equal to the value of "GS DETECT TIME" (Section 4.4.2.16). Turning
ON of the relay will automatically start the Generator [Refer to Sections 4.8.2.5.2(a) to (c)
for details].
• If parameter "MODE" is programmed at "1= Online" (see Section 4.4.2.13) and param-
eter "ONLINE OPTION" is programmed at 0= Option 1" or "1 = Option 2" (see Section
4.4.2.14), the Transfer Relay will be switched ON if the battery voltage drops to the pro-
grammed value of "LOW VOLTAGE ALARM" or lower for a period equal to the parameter
"GS DETECT TIME" (Section 4.4.2.16). Switching ON of the Transfer Relay will initiate
battery charging and AC pass-through (See Section 4.4.2.14 for details).
S e l e c t
G r o u p
*
C H A R G E
C U R V E
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
B U L K C U R R E N T
2 0 A
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
L O W V O L T
A L A R M
1 1 . 0 V
P a s s w o r d
k e y
i n
0 0 0 0
Enter Key
Down Key x 7 times
Enter Key
ð
S e l e c t
P a r a m e t e r
C H A R G E
C U R V E
*
L O W V O L T
A L A R M
1 1 . 0 V
Password 8052
See Section 4.3.1
ð
Enter Key
See Table 4.3, Screen No. 7
for programmable range
Enter Key
ð
See Table 4.3, Screen No. 8
for programmable range
Содержание Evolution Series
Страница 89: ...SAMLEX AMERICA INC 89 Notes...
Страница 90: ...90 SAMLEX AMERICA INC Notes...
Страница 91: ...SAMLEX AMERICA INC 91 Notes...
