Index revision : A
17
7118
5. Operations
Pressing the trigger serves to delay the order to open the air valve, then activation of the high
voltage, and lastly the paint nozzle needle. The high-voltage order may be inhibited by shifting
the gun switch.
The
Nanogun Airmix
®
H
2
O
gun is equipped with a magnetic sensor that detects the trigger posi-
tion. This sensor serves to activate the high-voltage power supply once the air valve returns to
a value lying between 1 and 1.8 mm.
WARNING :
The button located in back of the gun does not serve to adjust the paint flow rate;
nonetheless, it is possible to adjust it by modifying the nozzle calibre and/or the
incoming product pressure.
• The side button serves to adjust the spray dimension within a range that narrows as the
product pressure increases.
• Clamped screw: large impact.
• Loosened screw: reduced impact.
Note
: The higher the pressure of the product, the less the button on the side can vary the size
of the spray.
•
In order to modify the spray dimension, it is necessary to change the nozzle.
