Index revision : A
29
7118
10.5. Replacement of the head electrode.
Disassembly
:
•
Step 1
: Extract the conductive PTFE washer.
Insert the blade of the screwdriver under
the washer through one of the two slots at
the rear of the head(do not use the
housing where the centering pin is
located).
Make a slight rotating movement with the
screwdriver and proceed in the same man-
ner with the second slot.
Remove the washer by hand.
The rear part of the electrode is visible.
•
Step 2
: Straighten the electrode vertically
with the flat nose pliers.
•
Step 3
: Push the electrode toward the rear
of the head.
When the electrode is sufficiently out,
extract it from the rear with the flat nose
pliers.
