Index revision : A
11
7118
3. Description of spray gun and GNM 6080 control module
The
Nanogun Airmix
®
H
2
O
guns are for spraying water-soluble or water-dilutable water-based
paint.
Sprayed liquids must be non-flammable (defined in the draft standard pr EN 50059:2016 Annex
C) and strongly conductive.
The use of any other type of paint is excluded.
The
Nanogun Airmix
®
H
2
O
guns will be connected to the
GNM 6080
control module.
The versions of the
Nanogun Airmix
®
H
2
O
range are differentiated by the permissible product
pressure product and by the calibre of the insert.
3.1. Functions available based on this gun
• The switch (Rep. 1) allows turning on or off the high voltage supply.
When this switch is placed in position " I ", activating the trigger turns on the high voltage.
When this switch is placed in position " 0 ", activating the trigger does not turn on the high
voltage.
WARNING :
•
The knob in back of the gun (Rep. 2) must always be held in place (clockwise); it does not
influence the paint flow rate.
• The side detented knob (Rep. 3) serves to adjust the spray dimension. Its action will
become even weaker as product pressure rises.
Characteristics
Nanogun Airmix
®
H
2
O
120 7.5
Flat spray - 120 bar hose
7.5 m
Nanogun Airmix
®
H
2
O
200 7.5
Flat spray - 200 bar hose
7.5 m
1
2
3
