Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 15 -
13. P-2
14. N-29
15. N-53
16. N-31
17. N-35
18. N-32
19. N-55
20. N-30
21. P-3
DO NOT
OPERATE WHEN ANY
PERSON REMAINS IN THE
DANGER AREA OF 50 m
22. P-6
23. N-56
Optimum work parameters
1.
Inclination towards the front 4÷5 degrees which stands for 6÷7 cm of
mowing height .
2.
Operation speed
≥
10 km/h.
3.
PTO rpm = 950÷1000 rpm. PTO rpm > 1000 may cause stripes of uncut
grass between the discs.
4.
Tractor’s rpm (max. moment – economical fuel consumption1600÷1800
rpm).
High and inclined grass.
5.
Highten the cutterbar’s inclination to – H = about 4 cm.
6.
Operation without cutterbar’s inclination may cause winding of grass on the
forming drums .
7.
Speed up to V
≥
12 km/h. (the faster – the better)
8.
Do not take turns in the mowed grass.
POCHYLENIE ODWROTNE POWODUJE TRWAŁE
USZKODZENIE LISTWY DYSKOWEJ
DOPUSZCZA SIĘ PRACĘ W POZYCJI POZIOMEJ
ZALECANE POCHYLENIE
KOSIARKI W POZYCJI
ROBOCZEJ
m
a
x
.
7
c
m
min = 900
1
/min
max = 1050
1
/min
1000
1
/min
M
ax
7
,5
c
m
WORKING WITHOUT GUARDS
IS FORBIDDEN
DANGER OF THE STONES, ETC.
BEING THROWN OUT
CLEAN THE MOWER EACH
DAY AFTER WORKING,
especially between discs and the
cutterbar, because grass with mud
may damage bearings in the disc
module.
It is allowed to work in horizontal position.
Different inclination may damage the
mower.
Caution: Before putting the mower into transport
position,
block
ground
following
bracket
(Transport). Not blocking it may damage PTO shaft
WORK
