Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 10 -
Fig 5. Transport holders.
CAUTION:
Securing maneuvering area and transport of the mower is the
responsibility of a person who does it.
4.3. Working parts
Before operating the mower check knife’s and knife holder’s condition.
Worn or damaged knives or knife holders should be immediately replaced with new one.
4.4. PTO shaft
Use only PTO shafts recommended by mower’s manufacturer.
4.5. Residual risk
Despite the fact, that company SaMASZ Białystok – the manufacturer of the mower takes the
responsibility for design and manufacturing of the mower, in order to eliminate dangerous situations,
certain risk during mower operation is unavoidable.
1. Danger of catching
This kind of risk occurs during changing the position of a mower, operation near rotating parts,
working without safety guards.
During operation, maintenance and regulations always wear protective gloves, shoes and clothes
without loose parts, belts and so on. Always comply with safety decals placed on the mower.
2. Danger of injury
This kind of risk occurs during replacement of working parts with sharp edges. During any
maintenance work always use safety gloves.
3. Danger of liquid ejection out of hydraulic system
During connection of hydraulic hoses to hydraulic connectors make sure, that either tractor’s or
mower’s hydraulic system is without pressure.
During operation of hydraulic system always wear protective glasses and gloves. Check regularly
hydraulic hoses.
CAUTION:
Residual risk always results from incorrect behaviour of mower’s
operator.
Transport holders