Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 17 -
CAUTION:
Proper operation of hydraulic safety breakaway device is ensured only
manufactured adjustment of the valve (300 kg). Changing of safety
breakaway device adjustment will lead to losing of warranty.
5.
OPERATION
5.1.
Attaching the mower to the tractor
Mower KDTC 260 works properly with tractors (class 2,0 and power from 70
HP).
Mower KDTC 300
works properly with tractors (class 2,0 and power from 80
HP).
Mower KDTC 340 works properly
with tractors (class 2,0 and power from 90
HP).
Mower KDTC 260S works properly with tractors
(class 2,0 and power from 80
HP).
Mower KDTC 300S works properly with tractors (class 2,0 and
power from 90
HP).
Mower KDTC 260W works properly with tractors (class 2,0 and power from 80
HP).
Mower KDTC 300W works properly with tractors (class 2,0 and power from 90
HP).
The mower is connected to the tractor’s 3-point-linkage (Fig. 9). After the mower has been attached,
adjust (on the flat ground) the mower’s position by means of top S and lower links W (Fig. 9). The
cutterbar should lean towards the driving direction (see page 1). Lower links W should be connected
to 3-point linkage frame pins A. Support chain L holds up mower’s linkage frame.
Connect hydraulic hose to tractor’s hydraulic connector.
Fig. 7.Hydraulic safety breakaway
device.
Fig. 8. Simultaneous holding
back of the mower up
and backwards safety
breakaway advice is
used.
