Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 33 -
9.
DISASSEMBLY AND WITHDRAWAL FROM USE
1. Disassembly.
Before starting any repair or service the mower should be cleaned and any grass or dirt removed.
Carefully check nuts and bolts for correct tension and the pins for wear. Replace as necessary.
2. Scrapping.
If the mower cannot be repaired anymore, it should be withdrawn from use
.
For this purpose oil from intersecting axis gear and cutterbar should be drained and delivered to a
proper waste treatment company. Clean the mower parts, dismantle and dispose properly of all
plastic parts. After that, the mower could be sold to breaker’s yard.
CAUTION:
Before disassembly the mower should be disconnected from the
tractor.
10.
WARRANTY CLAIM
REAR DISC MOWER WITHCENTRAL SUSPENSION
Type of mower
Polish Id. No. KTM
Polish Id.No. PKWiU
KDTC 260 S/W (2,60 m)
KDTC 300 S/W(3,00 m)
KDTC 340 (3,40 m)
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
CAUTION:
A warranty card without the required information or with corrected or
illegible information – is invalid.
Serial number
Date of manufacture
Manufacturer’s stamp
QC signature
Date of purchase
Dealer’s stamp
Dealer’s signature