Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 29 -
7.
LUBRICATION
7.1.
Cutterbar
Refilling the oil of the cutterbar is done through the inlet A (Fig. 24a.). Proper oil level is 5÷7 mm
from the cutterbar bottom. Oil capacities are show in tab. 3. Removing the worked oil from the
cutterbar is done through the outlet B (Fig. 24b.) situated at the end of the cutterbar.
Model
Oil capacity [l]
Oil type
Lubrication frequency
KDTC 260 S/W - 2,60 m
6,5
KDTC 300 S/W - 3,00 m
7,0
KDTC 340 - 3,40 m
8,0
80W90
Once every 3 seasons
(if working intensively more frequently)
Tab.3. Oil capacities.
Fig. 24. Cutterbar oil inlet A and outlet B.
7.2.
Intersecting axis gears
Everyday before starting work please check the oil level and, if needed, please refill after having
removed the vent A on the top of the gear (Fig. 25). The oil level can be checked through the check
opening B on the side of the gear. Please refill the oil until it is visible in the check opening B. The oil
capacity: about 1 l.
Fig. 25. Intersecting axis gears oil inlets A and outlets B.
A
B
A
b
B
a
A
A
B
a
b
