Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 6 -
3-point linkage frame (1) enables attachment of the mower to tractor’s 3-point linkage. Drive from
tractor’s rpm is transmitted through intersecting axis gear (7) on PTO shaft (9), which through
intersecting axis gear (8) drives the cutterbar (4). On the cutterbar, there are discs with two knives
each. Apart from that, drive from tractor’s rpm through intersecting axis gear (7), PTO shaft (9),
intersecting axis gear (8) and chain gearbox (11) is transmitted to tine conditioner (3). Hydraulic
cylinder (2) is used to adjust the mower to working position. It is supplied from outer hydraulics of the
tractor. Main frame, on which the cutterbar is situated, is supported by the springs (12). On top of tine
conditioner’s safety guard there are swath guides (5) mounted.
Fig. 3c. Parts of SaMASZ rear disc mower with central suspension and roller conditioner.
3-point linkage frame (1) enables attachment of the mower to tractor’s 3-point linkage. Drive from
tractor’s rpm is transmitted through intersecting axis gear (7) on PTO shaft (9), which through
intersecting axis gear (8) drives the cutterbar (4). On the cutterbar, there are discs with two knives
each. Apart from that, drive from tractor’s rpm through intersecting axis gear (7), PTO shaft (9),
intersecting axis gear (8) and chain gearbox (11) is transmitted to roller conditioner (3). Hydraulic
cylinder (2) is used to adjust the mower to working position. It is supplied from outer hydraulics of the
tractor. Main frame, on which the cutterbar is situated, is supported by the springs (12). On top of
roller conditioner’s safety guard there are swath guides (5) mounted.
Well-proven design with thousands of machines in regular use in many countries and quality materials
ensure high durability and reliability of SaMASZ mowers.
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator’s manual with spare parts list,
cutting knives: KDTC 260 – 1 box, KDTC 300/340 – 2 boxes.
mounting lever for quick-knife changing.
PTO shaft with overrunning clutch.
Optional extra equipment:
warning plate with combined lights and reflectors,
warning triangle,
8
9
10
2
7
1
5
4
5
6
1 – 3-point linkage frame
2 – Hydraulic cylinder
3 – Roller conditioner
4 – Cutterbar
5 – Swath guides
6 – Safety guard
7 – Intersecting axis gear I
8 – Intersecting axis gear II
9 – PTO shaft
10 – Support leg
11 – Chain gearbox
12 – Support springs
3
11
12
