Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 30 -
Tab. 4. Oil capacities in intersecting axis gears.
CAUTION:
The above instructions should be strictly followed. If the discs in the
cutterbar rotate loosely, do not worry about the high intersecting axis
gear temperature; after long working time it may reach even 100
o
C.
7.3. Roller conditioner’s gearbox.
Before you check the lubrication of the gearbox, please remove the safety guard. Everyday before
starting work please check the oil level and, if needed, please refill after having removed the vent A on
the top of the gearbox (Fig. 27) The oil level can be checked through the check opening B on the side
of the gear. Please refill the oil until it is visible in the check opening B. The oil level: about 0,5 l.
Check oil level when the cutterbar is on the ground. Removing the worked oil from the gearbox is
done through the outlet C.
Tab. 5. Oil capacities in roller conditioner’s gearbox.
Fig. 27. Roller conditioner’s gearbox
lubrication points.
Model
Oil
capacity
[l]
Oil type
Lubrication
frequency
All types
1
Transol 680 ÷ 1000
(acc. to ISO 3448 oil
viscosity grade : VG-
680 – 1000 )
Once every 3
seasons
(if working
intensively more
frequently)
Model
Oil capacity
[l]
Oil type – for
gearboxes
Lubrication frequency
All types
0,5
80W90
Once every 3 seasons
(if working intensively)
Fig. 28. Bearing lubrication point with
LT43 grease.
A
C
B
Lubrication
points.
