Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 7 -
Tab.2 Recommended PTO shafts for KDTC mowers.
Mower
Power Length
Moment
Symbol
Clutch
Manufacturer
Notes
KM
mm
Nm
75
1010-1437
527
CS5N101CE00
7096L
Bondioli-
Pavesi
48
1010-1700
540
904-01268
Weasler
KDTC260 S/W;
KDTC300 S/W;
KDTC340
63
1010-1742
540
6R-602-7-BA-
J601
Overrunning
Wright
LFMR
Slide lock
PTO SHAFTS TYPES BUILT-IN THE MACHINE
CS4N081FX00
7N12PA
Bondioli-
Pavesi
904-001279
Weasler
KDTC260 S/W;
KDTC300 S/W;
KDTC340
36
860-1319
540
6R-602-6-BA-
C601
Friction clutch =
1250 Nm
LFMR
Built-in
Fig. 4. PTO shaft lubrication points. Mounting directions.
CAUTION:
Lubricate the PTO shaft with high quality multi-purpose grease every 8
shaft operating hours. If access holes are available, lubricate fittings
through access holes. E-kits need lubrication every 50 hours. See decal
on guard if applicable.
PTO shafts of other brands with equivalent parameters could be used after SaMASZ permission.
CAUTION:
Optional extra equipment should be ordered separately.
The mower is equipped with such elements as holders and brackets used to mount warning lights and
plates. Combined lights and reflectors are mounted on the warning plates.
We congratulate you on the purchase of your new SaMASZ mower and wish you much pleasure and
the very best work results through the years to come.
PTO shaft’s end without
clutch – To be mounted on the
tractor’s side.
PTO shaft’s end with
overrunning clutch – To be
mounted on mower’s side.
8h
8h
8h
