en
28
2.4
Water supply
The water filling process must be supervised!
Preparatory work
.
Open the hinged top cover.
.
Close the drain tap.
.
Open the water tap provided on-site.
Allow water to run in
.
Set rotary switch for ”
Mains on and tempera
ture setting
” to the lowest temperature.
D
The green indicator lamp lights up.
.
Turn rotary switch for ”
Water supply
” by a
click stop to the left or right.
D
Water runs in.
.
When the desired quantity of water has run
in or the highest fill level (level mark ”-6”)
has been reached, turn back the ”
Water
supply
” rotary switch by one click stop to
zero.
Setting the temperature and the power level
.
Set the desired temperature using the rotary
switch for ”
Mains on and temperature set
ting
”.
.
Set the desired power and mode using the
rotary switch for ”
Power levels and modes
”.
D
The yellow indicator lamp lights up while the
appliance heats up.
Rotary switch for
mains on and
temperature
setting
Rotary switch for
water
supply
(add-on equipment)
Water supply
(add-on equipment)
Level mark
Rotary switch for
power
levels and modes
Drain
tap