Salus Multi-Mix, Руководство по эксплуатации и установке, Страница: 10 / 40

10
8 Controller operation
Activating and deactivating
Press the switch on the screen in order
to activate the controller. “Activate
controller?” message will be displayed.
Accept your choice in order to activate the
controller.
To deactivate the controller, press
button, search for in rotational menu and
press it.
When the controller is
deactivated, an anti-freeze
function will not work. Therefore,
it is recommended that instead of
switching off the controller, set
support of the heating circuits
and DHW to OFF from the service
menu.
Preset temperature settings
Heating circuits
Preset temperature in heating circuits can be
changed by clicking element no. 4 directly on
the main screen. Can be also changed in the
menu:
Preset temperatures → H1…H3 → DHW preset
temperature
The preset water temperature in the heating
circuit is maintained on kept constant. In
addition, when setting the parameter
Pump
lock by thermostat to YES , the circuit will be
switched off when the preset temperature has
been reached.
It is recommended to set the
parameter
Pump lock by
thermostat to YES .
The edition of the parameter
Preset water temperature and
Pump lock by thermostat is
possible only when selecting the
method of adjustment to a
Constant value from the service
menu.
DHW tank
Preset temperature in DHW tank can be
changed by clicking on a preset DHW tank
temperature in DHW window. In order to
enter DHW window, click in controller main
screen.
DHW preset temperature can be also entered
in the menu:
Preset temperatures
→
DHW preset
temperature
DHW tank loading function
becomes active after connecting a
tank temperature sensor.
Time programs
The controller includes a function of
programming time periods. In situation when
the user is outside his home or at night, the
controller can decrease the amount of
supplied heat energy what affects fuel
consumption.
Time programs are defined separately for
heating circuits, DHW tank and DHW
circulation system. Time programs can be set
separately for each day of the week. Time
programs are entered in the menu
Time
functions .
Should be select the decreasing of the preset
temperature as well as the beginning and
ending of the given time interval.
In the example
below, a “ NIGHT ” period will
last from 00:00 till 06:00. “D AY ” period will
last between 06:00 – 09:00. From 15:00 to
22:00 the “ DAY ” period was entered. “N IGHT ”
period will last from 22:00 to 00:00.
After accepting the entered time period for a
particular day, the controller will propose a
possibility of saving this setting for other days