Saluki S1465 Series Скачать руководство пользователя страница 31

Страница: 31 / 243

Tel: 886.909 602 109 Email: [email protected]

www.salukitec.com

CAUTION

alarm indication zone on the front panel display. If not, it means the instrument is working

properly; otherwise, the instrument is not functional normally, in such case, please contact

our service consultation center via the contact provided on front cover II or in “6.4 Repair

method” for quick repair or replacement depending on the situation.

2.1.2 Configuration of operating system

This chapter introduces the operating system and methods of configuration and maintenance of

the S1465 series signal generator. To ensure that software is functional properly, please refer to the

following notes about the operating system:

2.1.2.1 Description of instrument software

The host software of the S1465 series signal generator works with Windows 7 and has been

installed and configured according to the requirements for instrument features. The host software is

based on Windows 7 and has been installed before delivery.

2.1.2.2 Windows 7 usage

The administrator account has the permissions to:



install third-party software;



configure network and printer;



read and write any files on the hard disk;



add and delete user accounts and passwords;



reconfigure Windows settings;



run other applications.

Third-party software may affect the instrument’s performance:

S1465 series signal generator is equipped with open Windows environment, and installing other

third-party software may affect the signal generator‘s performance Only software tested by the

manufacturer and compatible with the main unit software can be run.

2.1.2.3 Windows 7 configuration

Before delivery, the operating system of S1465 series signal generator has been optimized to the best

configuration, and any changes in the OS settings may cause a decrease in the performance of the

instrument. Generally, no changes need to be made for Windows OS settings.

The BIOS settings cannot be changed

As the signal generator has been set in BIOS, the user should not modify the settings in BIOS,

otherwise it will cause abnormal startup or operation of the instrument.

In order to facilitate the measurement reporting and system integration, user can change the

following items as needed.

CAUTION

Содержание S1465 Series




















































































































































































































































Результаты поиска

Содержание S1465 Series

Отзывы:

Похожие инструкции для S1465 Series

Бренды по названию

Популярные бренды

Saluki S1465 Series, Руководство пользователя

Результаты поиска

Содержание S1465 Series

Отзывы:

Похожие инструкции для S1465 Series

Бренды по названию

Популярные бренды