6
• Wipe the press with a damp cloth to remove any manufacturing dust and then dry.
• Wipe outer surfaces with a damp, soft cloth or sponge and dry thoroughly.
• Insert the drip tray underneath the lower press plate.
• Condition the cooking plates by pouring a teaspoon of vegetable oil/ using a
little butter on a piece of absorbent kitchen towel and spreading the oil/ butter
onto the non-stick surface. Wipe off any excess oil.
Don’t use low fat spread
– it may burn on to the press.
OPERATING INSTRUCTIONS
Preheat
• Centre the drip tray under the front of the press, so it catches any run-off
grease and fat.
• Put the plug into the power socket, ensuring the power cord does not rest
against the appliance or get trapped or pinched in the plates. The power light
will glow red.
• When the press reaches operating temperature, the ready light will glow
green.
Use as an open press
• Place appliance on a clean, flat surface
where the upper plate must be level with lower
plate/ base. The upper and lower plates line up
to create one large cooking surface.
• Locate the hinge release lever on the right arm.
• With your left hand on the handle, use your right
hand to slide the lever toward you.
• Push the handle back until the cover rests flat
on the counter. The unit will stay in this position
until you lift the handle and cover to return it to
the closed position.
• Use the appliance as an open press to
Flat Position
