salmson CC, Инструкция по установке и эксплуатации

Страница: 34 / 99

34
ENGLISH
Table 2, Menue description
Menue-
No. Display Description Parameter settings/
Functions Factory-
settings
visible for . changeable by
User 1 and higher: * User 1 and higher: *
Call User 2 and higher: ** User 2 and higher: **
by: Service: *** Service: ***
0 Main menue Display of operationmodes of
pumps and actual systempres-
sure valueCall of pumpsettings,
diagram and main menue none -
1 Pump 1...6 * Call of operation mode setting,
operationdata and information
about pump 1...6 (number:
installation specific)In case of the
FC-operated pump actual val-
ues of current and frequency are
being displayed none -
1.1 Operation mode Pump * Adjustment of opeartionmode of
pumps: Hand (on line), Auto-
matic (on line or FC-driven -
depends on controller) or OFF
(no starting of pump via control) Operation mode ** Automatic
1.2 Operation data Pump * Display of overall running hours
(since commissioning) and run-
ning hours at the day, switching
actions (Number of "On"-switch-
ings) none -
1.3 Info Pump * Display of pump information:
Type, output power P
2
and nom-
inal current I
N
. Input of pump
data when commissioning, Data
will be copied from pump 1 to
pump 2...6
Pump type
Output power P
2
[kW]
Nominal current I
N
[A]
**
**
**
Installation
specific
2
0,00 bar
Diagram * Diagramm for displaying of sys-
tempressure and FC-frequency
values over time axisCall of trig-
gersettings and simulationmode keine -
2.1 Triggerein settings * Setting of time base (triggertime)
of diagram Trigger time [s] * 0 s