Salford 699, Сборка и каталог запасных частей

Страница: 20 / 64

Salford Farm Machinery Ltd.
Page 20
2011 699-40' Disc Cultivator Assembly and Parts Manual
06-2011
66" (168cm)
INITIAL
SETTING
4
11
12
8 7
11
LH SHOWN, RH SIMILAR
1
6
13
14
17
18
16
5
10 2
LH RH
3
22
19
20
21
21
9
11
15
10
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 C10739 700-1 PRIMARY WING AXLE TOWER
2 1 C5540WL 8000 LB WING AXLE ASSEMBLY - LH
3 1 C5540WR 8000 LB WING AXLE ASSEMBLY - RH
4 1 A60020 1 1/4" TURNBUCKLE 54" TUBE
5 1 HSR3708 3 3/4" BORE x 8" STROKE HYD. CYLINDER
6 1 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
7 1 BL10 5/8" LOCKWASHER
8 1 B1015 5/8 X 1 1/2" PLATED BOLT
9 1 GPHF1600314H04 1" x 3 1/4" SHOULDER PIN HARDENED W/FLATS
10 2 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
11 4 BSC0415 1/4" x 1 1/2" COTTER PIN
12 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
13 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
14 2 B1040 5/8"NC x 4" LG. HEX BOLT
15 2 BN10L 5/8" NYLOCK NUT NC
16 1 FL00051 LIGHT TURNBUCKLE LOCK
17 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
18 1 GHP11 #11 HAIR PIN
19 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
20 2 GBB175150062 1 3/4" x 1 1/2" x 5/8" LG. HARD BUSHING
21 2 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
22 2 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
Note: quantities shown are for wing axle installation on one side only. Double quantities for
complete machine wing axle installation.
1. Line up axle tower (1) and upright of tandem axle assembly (2, 3) with lugs on wing
frames. Insert axle flatbar pin (6) through tower and axle. Retain pin with 5/8" x 1 1/2" hex bolt
(8) and 5/8" lockwasher (7). Note orientation of lugs on axle towers.
2. Set wing turnbuckle (4) to 66" (168cm) long pin to pin. Attach turnbuckle to axle tower with
1" x 2 5/8" head pins (12) and 1/4" x 1 1/2" cotter pins (11). Place turnbuckle lock (16) over
turnbuckle and attach to frame with 1" x 3 1/4" head pin (10) and 1/4" x 1 1/2" cotter pin (11).
Secure turnbuckle lock to turnbuckle with 1/2" x 3 1/2" L-pin (17) and #11 hairpin (18).
3. Attach 3 3/4" x 8" hydraulic cylinder (5) to axle tower and axle beam with 1" x 3 1/4" head
pins (9/10) and 1/4" x 1 1/2" cotter pins (11). Connect hoses and charge lift axle cylinders
with fluid following the procedure in the hydraulics installation before connecting rod
ends of the cylinders.
4. Insert 5000 lb hub and spindle assemblies (13) into axles and retain with 5/8" x 4" hex
bolts (14) and 5/8" locknuts (15).
5. Apply grease to all fittings.
Notice: Salford uses replaceable bushings (Item 19 - 22). The bushings are oversized and
will need to be tapped into place with a hammer. When removing worn bushings, take care
not to gouge the seat surface.
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 C10739 700-1 PRIMARY WING AXLE TOWER
2 1 C5540WL 8000 LB WING AXLE ASSEMBLY - LH
3 1 C5540WR 8000 LB WING AXLE ASSEMBLY - RH
4 1 A60020 1 1/4" TURNBUCKLE 54" TUBE
5 1 HSR3708 3 3/4" BORE x 8" STROKE HYD. CYLINDER
6 1 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
7 1 BL10 5/8" LOCKWASHER
8 1 B1015 5/8 X 1 1/2" PLATED BOLT
9 1 GPHF1600314H04 1" x 3 1/4" SHOULDER PIN HARDENED W/FLATS
10 2 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
11 4 BSC0415 1/4" x 1 1/2" COTTER PIN
12 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
13 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
14 2 B1040 5/8"NC x 4" LG. HEX BOLT
15 2 BN10L 5/8" NYLOCK NUT NC
16 1 FL00051 LIGHT TURNBUCKLE LOCK
17 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
18 1 GHP11 #11 HAIR PIN
19 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
20 2 GBB175150062 1 3/4" x 1 1/2" x 5/8" LG. HARD BUSHING
21 2 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
22 2 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
699 Wing Axle Installation