06-2011
Page 55
Salford Farm Machinery Ltd.
2011 699-40' Disc Cultivator Assembly and Parts Manual
Spring tension adjustment tool
DECREASE
L-pin Frame height adjuster
Rotating this clip will increase or decrease downpressure of roller
INCREASE
To change the height of the arm rotate block, block has three different settings
Frame angle adjust, raise front rank
HARROW SETTINGS
Pitch adjuster
By flipping this angle iron each row of tines will change to a different pitch
Switching holes will change angle of tine section
Using this set of holes will vary the rake angle
This set of holes is the 'standard' setting.
as shown above.
Here the rake angle is varied
Here the tine section is angled
by changing the bolt hole used.
Shown here is the 'standard' setting
For better trash flow, the tines are adjustable in 2 ways:
use top bolt
hole to
angle tines
This Angle-Iron has two
sets of holes.
FRONT
use bottom bolt
hole for
'standard' setting.
5/8"
3/4"
1"
1"
Harrow Tine Settings
