Salford Farm Machinery Ltd.
Page 4
2011 699-40' Disc Cultivator Assembly and Parts Manual
06-2011
Signal Words
The words
DANGER, WARNING
or
CAUTION
are
used with the safety alert symbol. Learn to
recognize the safety alerts, and follow the
recommended precautions and safe practices.
Three words are used in conjunction with the safety-alert symbol:
DANGER
WARNING
Indicates an imminently hazardous situation that, if not
avoided, will cause DEATH OR VERY SERIOUS INJURY.
Indicates a potentially hazardous situation that, if not
avoided, could cause DEATH OR SERIOUS INJURY.
CAUTION
Indicates a potentially hazardous situation that, if not
avoided, may result in MINOR or MODERATE INJURY.
Replace any
DANGER, WARNING, CAUTION
or
instructional decal that is not readable or is missing.
The location and par t number of these
decals is identified later in this section of the
manual.
The words
Important
and
Note
are not related to
personal safety but are used to give
additional information and tips for
operating or servicing this equipment.
IMPORTANT:
Identifies special instructions or
procedures which, if not strictly
observed could result in damage to, or
destruction of the machine, process or
its surroundings.
NOTE:
Indicates points of particular interest for more efficient and convenient repair or operation.
A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT !
Wings may fall rapidly
causing injury.
Always stay clear of wings
when being lowered, raised
or in a elevated state.
Always use lockup device
provided when raised.
Ensure cylinder is completely
filled with hydraulic fluid to
avoid unexpected
movement.
•
DO NOT
search for high pressure hydraulic
leaks without hand and face protection. A
tiny, almost invisible leak can penetrate skin,
thereby requiring immediate medical
attention.
•
Use cardboard or wood to detect leaks
–
never
your hands.
•
Double check that all is clear before
operating hydraulics.
•
Never
remove hydraulic hoses or ends
with machine elevated. Relieve hydraulic
pressure before disconnecting hydraulic
hoses or ends.
•
Maintain proper hydraulic fluid levels.
•
Keep all connectors clean for positive connections.
•
Ensure all fittings and hoses are in good condition.
•
Do not stand under wings.
General O
Hydraulics
DANGER
DANGER
General Safety Precautions
