DLY (DELUXE) SERIES HYDRONIC CASSETTE
.
30
WALL PAD OPERATION
1) Clock display and setting
System has an accurate internal real time clock (RTC) used for time indication and timer ON/OFF function.
Normally, real time clock display area indicates internal time clock which can be set by
7,0(
or
7,0(
button.
2) Day display and setting
The wall pad support day display function, it can be used as day indication and timer ON/OFF function, day
display icon indicates current day. Press
'$<
button to set day.
3) Timer ON/OFF setting
If master unit is in global control mode and on/off timer setting is reached, master unit will command the whole
network to be on or off. Otherwise timer on/off is effective to the local unit only. The system supports 7 days
on/off timer setting.
a) Press
7,0(5
button once,
and
ON
symbol blinking indicates on timer programming mode, day
display area indicates the day for setting timer on. If on timer for this day is null, timer display area
shows
, otherwise the on timer setting will be shown. Press
7,0(
or
7,0(
button to change the on
timer setting. Press
&$1&(/
key to cancel the current on timer selected and the timer display area
shows
. Press
'$<
button to change the day the on timer to be programmed.
b) Press
7,0(5
button again,
and
OFF
symbol blinking indicates off timer programming mode. The
setting method is the same as on timer setting above.
c) Press
7,0(5
button again, to exit timer on/off setting function.
d)
Should there be any on or off timer being programmed,
will light up. Should there be any unexecuted
on or off timer for the current day, its corresponding
ON
or
OFF
icon will light up.
e) Hold
down
&$1&(/
button for 3 sec will cancel all timer settings.
Timer set by master unit are as follow:-
1. Press
1(7
button to enter into networking control mode. Unit area blinking indicates the slave unit
under control. Press
7,0(
or
7,0(
to select the desired slave unit. Units that offline will be skipped
automatically.
2. Press
7,0(5
button once to enter into on timer programming mode. Press
'$<
button to select
the require day of week. Master unit will then retrieve the setting from the selected slave unit and
timer display area will show ’rEAd’. The on timer setting will be shown upon reading the data
successfully. Press
7,0(
or
7,0(
button to change the on timer setting.
3. Press
7,0(5
button again to enter into off timer programming mode. Press
'$<
button to select
the required day of week. Master unit will then retrieve the setting from the selected slave unit and
timer display area will show ‘rEAd’. The off timer setting will be shown upon reading the data
successfully. Press
7,0(
or
7,0(
button to change the off timer setting.
4. Upon completion of changing timer settings of the selected day, press
7,0(5
button again to exit
timer programming mode. The settings will then update to the selected slave unit. The next day of
SAKURA - Total Air Conditioning Solution
