Sagem F@st 244x, Справочное руководство

Страница: 81 / 254

6 - Information / Configuration
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Sagem Communication document. Reproduction and disclosure prohibited Page 6-11
6.7.1.1 Wireless - Basic
Field Action/Meaning Default:
Enable Wireless Check the appropriate box to activate the wireless
network (Wi-Fi).
Note: The " Wi-Fi " LED which lights up steady on the
front of the router shows that the wireless
network (Wi-Fi) is activated.
Box
checked
Hide Access Point Check the appropriate box to mask the broadcast of the
SSID and prevent any Wi-Fi connection on your router.
Note: When this box is checked, the router's SSID is
absent from the Wi-Fi adaptor user's own list of
monitored sites (Access Point).
Box not
checked
SSID Enter your router's SSID.
Note: This indicated on the label stuck to the box.
Sagem
Country
Select the country of your choice from the scroll down
list.
FRANCE
BSSID This is the MAC address of the router's Wi-Fi interface
(Access Point). In the "Structure" mode, this address
identifies a cell (BSS in English
B asic S ervice S et).
This cell is a set formed by the access point and the
stations located in its coverage area.
Non modifiable
_
Channel This is the radio channel used by the router and
its Wi-Fi clients to communicate with each other. This
channel must be the same for the router and all its
Wi-Fi clients.
Select the channel you want from the scroll down list
(auto, channels 1 to 13).
Note: Channel 11 corresponds to frequency
2462 MHz.
Note: If you select "Auto", the Wi-Fi equipment will
select the access point channel (router) which
will emit the strongest signal.
You will find an identical "Channel" field in the
"Advanced" menu of this same section. Any
modifications are carried over from one field to
another.
Conform to the CE Declaration of conformity / Radio
rules list in appendix B to paragraph B.2.
Auto